Philips HP 5231 free download

File name cellesse_sense_active_®_.pdf

Cellesse Sense Active HP 5231 PRODUCT INFORMATION Type appliance Voltage (mains) : 13 V adapter from mains (AC) : 220-240 V, 50/60 Hz and 110-127 V, 50/60 Hz : DC type Introduction The Cellesse is a special massage system, designed to help to reduce or prevent the unsightly appearance of cellulite. Cellulite is the increased visibility of lumpy fat deposits through the surface of the skin. A common used description is `orange peel skin' because of its unique pitted, lumpy appearance. Cellulite should not be confused with `cellulitis', which is a medical term linked to bacterial infection of the skin. Cellulite can be reduced with the help of this product. It can never be completely eliminated and will return when neglected. Cellesse can smooth the cellulite layer inside the skin by up to 49 % in one month, if the appliance is used 3 times a week for 15 minutes on each leg. The Cellesse Sense Active does not reduce the fat in the fat layer. Motor Max. powerconsumption : 8 Watts Under pressure Number of rollers Length cord : 5 steps from 80 mbar to 250 mbar : 2 driven and 2 non-driven (small) : 2.5 m Note: Product meets the requirements regarding interference suppression on radio and TV. Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 4822 729 22059 99/02 PCS 101 219 FUNCTIONAL DESCRIPTION OF THE HP5231 CELLESSE Function of the Cellesse The product is connected to the mains and the ON/OFF switch (A) is set to level 1 ­ 5. The electronic suppression switch (C) switches on the motor of the massage rolls (E). The Pump B starts to function. The pump (B) only starts to function if the appliance is in a proper contact with the skin so a vacuum of at least 80 mbar can be reached. Once a vacuum of 80 mbar is reached the small indicator lamp on the front of the appliance lights up to show that a proper contact is made. 3 To avoid painful sucking in of the skin, the vacuum stop buttons (F) 2 can be operated so that the 4 vacuum is eliminated. The Cellesse only functions properly if the product is put 1 0 5 properly on the skin so that the pump can build up a vacuum in the sucking area. (G) Cleaning and maintenance Never immerse the appliance in water or rinse it. For the best results, clean the appliance after every treatment session with a moist cloth and, if necessary, a drop of washing­up liquid. Make sure the filter does not get damp. Do not use alcohol, acetone, benzine, abrasives, scourers etc., to clean the appliance. Cleaning the rollers To clean the rollers select Level 1. Wipe the rollers clean with a damp cloth. 3 2 4 1 0 5 Cleaning the hand-strap (1) The hand-strap with claps can be washed in a washing machine at max.40 °C. Washing may slightly change the colour of the strap. VACU-stop Button TP6 +13V not on W4 PCB red not on PCB F On/off Switch + Suppression Switch Level 1-5 A W1_1 TP11 TP13 not on W7 PCB red not on PCB C3 R1 Q1 A3 TP7 A4 W